DMR Gutters Copper Gutter Installation Price List Page

Solid Copper Gutter & Downspout Prices Prices are per foot or per each piece, including parts and labor. Extra charges for complicated installations and removal of old parts.
$ 15	for 16oz copper gutters with heavy duty solid 48 ounce copper hidden hangers w/a pair of 1.5" stainless steel screws in each hanger, the best caulk sold, copper rivets w/brass mandrels (this is for one story low slope composite roofs. Hard install is extra)
$ 18	for as above with the heavy duty 20oz copper gutters (reason: the thicker 20oz copper gutter coil is is much more expensive and also harder to acquire, because our local suppliers do not stock it, since there is no demand by the other gutter contractors for it)
$ 12 16oz $ 14 20oz	for copper gutters delivered, but not installed, with heavy duty solid 48 ounce copper hidden hangers for each 2' of gutter w/a pair of 1.5" stainless steel screws in each hanger (See our Local Gutter Parts Delivery web page for more details, installation instructions, and recommended tool list)
*$ 9.50* *$ 10*	for deluxe copper or stainless steel leaf screens over new gutters, low sope composite roofing Note: I feel these are too expensive for the lasting advantage, so I recommend the same screens I use for aluminum gutters instead that are only $2.50 ln'). for these screens installed on your old copper or aluminum gutters (to include gutter cleaning), or for installation with irregular roofing
*$ 70* *$ 105*	for copper leaf-catchers installed in new downspouts (for underground sewer drain pipe protection). for installation into your existing downspouts, plus the cost of any needed replacement parts.
*$ 70* *$ 105*	for the double sized no-clog copper outlets with a 3"x4" elbow and a 2"x 3" reducer into our new downspout installation. for installation into your existing copper gutters.
Added Charges for Common Preparation
*$1.00*	for removal and disposal of your old steel gutters (disposal is free if the gutters are already down and cut up into 9.5 foot sections).
*$1.50*	for removal and disposal of plastic gutters (to help cover the dump fee).
$ 0.75	Aluminum gutter removal (this is less than steel removal, since the recycle value covers some cost)
$ 0.00	Copper gutter removal (this is free, since the recycle value covers that cost)
*$1.50*	for rafter tail attachment, because of alignment and the longer screws.
*$2.00+*	for hard installation like: second story gutters, steep pitch roofs, wood metal or tile roofs, and brick stone or stucco siding.
*$ 60* *$90*	for extra labor to miter any 90 degree corners needed, or mitered end-caps, and split gutter expansion joints (for lengths of 40 feet or more). for odd angles.
*$ 7*	for 1”x 3” copper drip edge.
*$ 12* *$ 14*	for 2”x 6” style 16oz copper fascia metal cover. Plus $5 for each custom end or corner for 2”x 6” style 20oz copper fascia metal cover. Plus $5 for each custom end or corner

Copper & Brass Rain Chain/Cups (or funnels)

These are an attractive alternatives to a standard closed downspout pipe. Being a gravity feed system you'll need a basin below to catch this water and channel it away from your house foundation. It is best to remove the end-cap from the gutter and bend the floor of the gutter down to direct the water into the top of the rain-cups. This helps prevent debris from forming a blockage over the outlet. I use a 1/4" stainless steel eye hook to support the weight of these that may become caked with ice in the Winter.

Most of these also come in sets of 3 funnels per foot without the chain links between them (as seen above). The economy sets with the links are very fragile, since those links are just hollow copper tubing and may come apart when caked with ice in the winter. The non-loop sets can be spread out with solid 4 ga. copper wire loops for much greater strength and variable size loops.

Tea Pot w/Tea Cups, Watering Can w/Flowers, or Wine Bottle w/Grapes & Wine Glass:
$170 - 6' 6" strand w/loops
$65 - for 3' extension section

Buttercup, Tulip, Fish, or Umbrella:
$300 - 12' strand all funnels (no loops, as seen above)
$80 - 3' strand all funnels (no loops)
$220 - 12' strand w/loops
$60 - 3' extension w/loops

$260 - 12' strand Pineapple Style
$160 - 12' strand Bamboo style

Smaller Bluebell or Crocus:
$220 - 12' strand all funnels (no loops)
$60 - 3' extension all funnels (no loops)
$160 - 12' strand w/loops
$45 - 3' extension w/loops

Theft Deterrent:
$100 - 3/16" stainless steel cable run up through the rain-cups and attached in the gutter. Then attached at the bottom to an 8' steel grounding rod hammered all the way down into the earth and double clamped.

Here is the price sheet and gutter chart to print out and use to calculate what this would run.
Even if you are not local, you could use it to compare other bids you get to see if they were honest.
I have made it quite simple here to draft out your gutter project.